產品介紹：

    雙動力頭多功能鉆機是我公司引進韓國技術，結合自主創新研發的一種高效環保基礎施工設備。可在土層、砂層、卵礫石層、巖層、流沙層、流塑性淤泥層、溶洞，易坍塌、地下水位高等復雜地質條件下快速鉆孔，形成大承載力嵌巖樁(入巖樁)抗滑樁、咬合樁等。
    DUAL POWER HEAD MULTI-FUNCATIONAL DRILL RIGIt is an efficient and environmentally friendly basic construction equipment developed byour company with the introduction of South Korean technology and independentinnovation. lt can be drilled quickly in soil layer, sand layer, gravel layer, rock layer.quicksand layer, fluid plastic silt layer, karst cave, easy to collapse, high groundwater levelcomplex geological conditions, to form large bearing capacity rock socked pile (rock pile)anti-slide pile, bite pile, etc.

技術特性：

• 分離式雙動力頭 SEPARATE DUAL POWER HEAD：同軸逆向旋轉、上下任意分離、恒功率、大轉矩

    可分離式雙動力頭配置，進行復合雙回轉驅動，內側鉆桿與外側鉆套可同時或分別進行同軸逆向旋轉;根據施工工藝需要，內側動力頭與外側動力頭可上下任意分離、相對運動。采用電動機驅動，變頻控制，根據負載調整轉速，動力頭在不同轉速下也具有相同功率，動力性能優異、輸出轉矩大、過載能力強。
    Coaxial reverse rotation, arbitrary separation up and down, constant power, large torque

    beoarape ualoower head conleuraton. comoound douple rotan dnve.the inner ailline and the outer arl sieeve can be simutaneousy or senaratev coaxal reversprotation, According to the neds ofconstrucion technology,the inner power head and the outer power head can be separated up and down and relative movement.Adoptmotor drive, trequency conversion control, adust the speed according to the load, the power head also has the same power at dilerent speds, excelent dynamicperformance,large output torque, strong overload capacity.

• 獨特的鉆孔方式 UNIQUE DRILLING METHOD：同軸逆向旋轉、轉矩自平衡

    在雙動力頭驅動下，采用內側鉆桿與外側鉆套同軸逆向旋轉方式鉆削;鉆桿與外鉆套產生的鉆削轉矩方向相反相互抵消、自行平衡，使鉆孔過程穩定無噪聲振動。
    Coaxial reverse rotation, torque self-balancing
    Under the drive of double power head, the inner drill pipe and the outer side dril sleeve are rotated in a coaxialreverse way.
The driling torque generated by the drill pipe and the outer drill sleeve counteracts each other in the oppositedirection and balances itself, making the drilling process stable without noise and vibration.

• 新式組合鉆具、組合潛孔錘 NEW COMBINED DRILLING TOOL AND COMBINED DTH HAMMER：剛性強、精度高、不怕硬、能“入巖”

    鉆桿鉆頭與外鉆套雙重組合鉆孔，外鉆套護壁，鉆桿連續排土，整體剛性強、鉆削力大、成孔精度高，施工速度快，可應對各種復雜地層強力鉆削。
    此外，還可配置外鉆套和潛孔錘的組合(配置相應的空壓機供氣系統)，實現高效率打孔“入巖”。

    Strong rigidity, high precision, not afraid of hard, can "enter the rock"

    Drllpipe dil bit and outer dil sleeve double combination driing,outer drllsleeve wal protection,drllpipe continuous soldischaree, strong overallrigidity, laree diling force.hieh hole accuracy fast constuction speed, can cpe with a yanety of complex formation strone diline, in addion,it can alo be confieued with a combination of exteradriling sleeve and driling hammer (configuration of the corresponding air compressor gas supplysystem) to achieve high eficiency driling "into the rock"

• 雙動力頭電驅動、變頻控制 DUAL POWER HEAD ELECTRIC DRIVE,FREQUENCY CONVERSION CONTROL：運行平穩、扭矩大、重量輕、體積小、國內首創

    

• 智能化施工 INTELLIGENT CONSTRUCTION：可選配施工管理系統

    Optional construction management system

案例：

廈門	福建	杭州